Vex Versaplanetary gearbox 90 degree drive cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cover for the 90 degree versaplanetary drive kit from Vex Robotics.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 140
- Makes
- 0
- Views
- 1,006
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is a cover for the 90 degree versaplanetary drive kit from Vex Robotics. I designed and printed this to cover the exposed bevel gears. The case slides on from the side and then there are holes so you can put a bolt in and secure it. I recommend you install the 90 degree gearbox first and then snap off two of the tabs to let the case clear the mounting bolts (the picture has a mounting bolt clamping on the case, this is wrong. I will try and upload a correct picture). You only should have one bolt holding the cover on, and it should not be on of the bolts holding the gearset together.
I recommend printing in the orientation in the pictures with support enabled.
I posted the sldprt as well as the stl in case you want to modify the design at all
Print instructions
Category: Robotics