1 / 2
Cooler Master MasterBox Q300L headphone holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic hook for your headphones that attaches to the computer case
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 1381
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (24)Powiązane
The Q300L has clip-on plastic bars in every corner that can be taken out and swapped around as neccessary for your case configuration. This thing replaces one of those bars with a custom one with mount holes. I've used it to add a headphone holder since it's pretty conveniently placed.
UPDATE 6.7.2023:
New, redesigned version. The old one had multiple problems, like rattling, clips breaking off, sagging, hook too small etc. (Photos are still of the old version. Look at the models to get an idea of how it'll look now.)
- Replaced previous attachment system with screws.
- Hook has holes for 2x M3 heat-sets and can be screwed in with M3x12 (they self-thread the corner)
- Corner has holes for 4x M3 heat-sets. You can probably get away with using just two. Use M3x6 or M3x8 and some washers. If you don't have washers, you can print the included ones.
- Hook is 1,5cm longer. It now fits the biggest headband and earcups I have, the T50RP, without problem.
- Cornerpiece is thicker. Partly to accomodate the heatsets, partly to combat warping over time from the heat & load. We'll see if it helps.
- Improved printability. No more impossible overhangs, no more need for supports, no weird orientation neccessary for the hook.