1 / 1
Tea Caddy, Pot with Lid
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tea caddy to be printed in vase mode. Use food safe filaments, if you want to store tea or edible stuff in it.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Please be aware that food safety is a complex topic and if you are storing food in 3d printed objects, you do so at your own risk.
How to print (recommended)
- Scale: 100%
- Nozzle: 0.6mm
- All extrusion widths: 1mm
- All layer heights: 0.25mm
- Bottom shell thickness: 1.25mm
- Print speed: 1st layer: 15mm/s, rest: 30mm/s
- Print hot and slow with minimal cooling for good layer adhesion
How to print (advanced)
- Scale: Size the model to your liking but don't forget to recalculate the extrusion width.
- Use whatever settings you like.
Finishing touches
- Sand the outside walls of the lid-neck and the inside walls of the pot neck area to smooth out layer lines.
- With the 1mm gap lid: This will be a loose fit and probably won't need any sanding.
- With the 0.75mm gap lid: Recommended. Needs some sanding and then fits nicely in the pot.
- With the 0.5mm gap lid: Very tight fit. Needs a lot of sanding and will give the smoothest and tightest fit.