1 / 1
Tea Caddy, Pot with Lid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a tea caddy to be printed in vase mode. Use food safe filaments, if you want to store tea or edible stuff in it.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Please be aware that food safety is a complex topic and if you are storing food in 3d printed objects, you do so at your own risk.
How to print (recommended)
- Scale: 100%
- Nozzle: 0.6mm
- All extrusion widths: 1mm
- All layer heights: 0.25mm
- Bottom shell thickness: 1.25mm
- Print speed: 1st layer: 15mm/s, rest: 30mm/s
- Print hot and slow with minimal cooling for good layer adhesion
How to print (advanced)
- Scale: Size the model to your liking but don't forget to recalculate the extrusion width.
- Use whatever settings you like.
Finishing touches
- Sand the outside walls of the lid-neck and the inside walls of the pot neck area to smooth out layer lines.
- With the 1mm gap lid: This will be a loose fit and probably won't need any sanding.
- With the 0.75mm gap lid: Recommended. Needs some sanding and then fits nicely in the pot.
- With the 0.5mm gap lid: Very tight fit. Needs a lot of sanding and will give the smoothest and tightest fit.