Universal Ebike Brake Switch Mount for Hydraulic Brake Levers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First release of an adjustable silicon glue/ zip tie mountable brake switch holder for kw12 micro switches ( buy here:…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
First release of an adjustable silicon glue/ zip tie mountable brake switch holder for kw12 micro switches ( buy here: https://www.ebay.de/itm/183765013263 )
I tried it's fit on a Shimano, Meroca and a Zoom brake levers, if you try on another model, do comment please...
On ebikes it is advisable to cut of the motor power when applying the brake, it can be an important safety feature when the throttle signal becomes faulty, it also potentially safes brakes and battery! usually there is a specific brake input, but shortening the throttle signal to ground via the brake switch(es) can also be a solution.
Of course this switch can also power up a brake light, or initiate regenerative energy recovery braking if that is supported by your hardware!
As with all things DIY - YOU ALONE CARRY ALL RESPONSIBILITY FOR THEIR USE!
Category: DIY