Magnetic Shoe Laces (slim-fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These magnetic shoe laces are printed in two pieces for each shoe. The parts are sticking together by using a small…
- Ocena
- 3 / 5
- Polubienia
- 16
- Pobrania
- 61
- Wydruki
- 3
- Wyświetlenia
- 1013
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
These magnetic shoe laces are printed in two pieces for each shoe. The parts are sticking together by using a small hook and a magnet.
While there are already many designs on Thingiverse most of them are quite massive in size and won't fit shoes with only little space for the laces. This is why I designed these magnetic laces which will fit better in that situation. The width of the parts when "connected" is only 18 mm. The distance required between the wholes on both sides is ~10-15 mm. Distances between two holes on one shoe side is ~20mm.
The magnet should have a diameter of 10 mm and 2 mm height.
Example: https://www.amazon.de/gp/product/B06X977K8L/
The magnet is inserted during print (you need to pause your printer before the layer at height 2.9mm starts. Printing with 0.1mm layer height is recommended.
Print Settings
Rafts: No
Supports: No
Resolution: 0.1mm
Infill: 20%
Filament: PLA
Notes: Printed on a Ender 3 v2. First Layer with 0.2mm height.