55 modeli
These boxes are pretty heavy and would recommend these be printed in PETG at a minimum with 6 walls and 25% infill. Would also recommend ¾" lumber using #10 1-½" wood screws.
Note: I did not make this model. Just reposting it from here . All credit goes to 123one . Use this 3D Printed Cleat set to attach plywood (or almost anything) to the top of a Festool / Tanos T-Loc Systainer creating a mobile work…
Print for decoration or to practice tying knots. Please use common sense and your best judgment if you want to use this with actual boats it might hold a kayak or a rowboat but probably not a big motor boat or sailboat. And many filaments…
Festool systainer cleats for old style systainers. Should be compatible with Hitachi and Makita systainers as well, but have only tested on Hitachi. Can be used to attach a custom MFT style board to top case. Beware the existing classical…
SPD cleat cover protects the spd cleat and protects the floor you are walking on. It fits all Shimano compatible two-bolt spd cleats (sh-51, sh-56, etc) Walking is much more comfortable with them. The cleat does not crackle on the…
So, I wanted to put rolly wheels upon my Makita Cases, and wanted it cheap. Got some small rolly wheels, a small sheet of 1/2" (or 12mm for you metric types) playwood, and some cheap screw in rolly wheels. I was actually impressed with…
I wanted to start organizing my studio with some wall storage, but I didn't want to drill the wall more than necessary. So I designed and printed this model to hold some spare IKEA table tops I have, they are quite heavy (140cm 10kg and…
This is a remixed Suncast Easybolt from Terrywood02. I added a little bit of length and a nipple to keep it centered when fully tightened. The length was added to use them to mount ¾" plywood French Cleats to the walls for better tool…
Spacers/shims for Crank Brothers cleats, modelled on “ Crankbrothers Shoe Match Shim" (part no. 641300166852). Have included a variety of thicknesses in addition to the “regular” thickness, should people want to fine-tune more than the…
Multicolor version just came up, check it out! https://makerworld.com/es/models/2857315-multicolor-mini-golden-soccer-cleats-keychain#profileId-3187993 No need to assemble this Mini Soccer Cleats Keychain — Print In Place This is a simple…
Being less than enthusiastic about the VHB DIN mounts in the Voron 0.2 parts list and unable to find simple alternatives which seemed just right, here is my version. Instead of fiddling with positioning sticky pads correctly, these mounts…
This is a simple remix of Geoff's screw-fit DIN cleats for the Voron 0, extended so that controller boards can be mounted further from the center / closer to the edges of the back panel to make room for a cable duct + Klipper Expander…
DDD wall control cleats for packout accessories. I didn't actually print these (I don't have any packout) but I did remix this from a thingyverse model and confirmed spacing with others. Made a single, a double, and a light version of…
Simple printable cleats to hang bench planes on vertical, or inclined surfaces. My method for mounting is to attache the bottom cleat first, then take the plane and slide it up so it will just clear this bottom cleat. Keeping the plane in…
EN I was not happy with the original spacer from crankbrothers. The original 1mm spacer is a little bit to thin in combination with the pearl izumi X-Alpes shoes and the Mallet-e pedals. this new 1.5mm spacer fits perfect. Additionaly to…
Print two of these to create a cable wrap, for power cables, etc. I designed for a mobile camera robot cart, but there are plenty of places to use.
MiniCleats , because we need even more mounting systems. While installing a French cleat system in my shop, I had a thought; what about adapting this into (yet another) 3D organization system? I’ve been using the Honeycomb Wall concept,…
Add french cleats to your Ikea skadis board. The model takes two holes. Also included is a model for attaching to the Ikea Moppe drawers. See the T-nuts for IKEA skadis project to print the T-nuts needed to attach it to your board. Works…
I buyed a Shimano AM7 shoes that has no cleat protectos included, I don't need to mount SPD Cleats right now. This fit very nice on my shoes but should mount on any supporting spd, watch espcially for the item height to be sure that they…
These are Dummy 13 soccer cleats, that double as work shoes. They are comfortable for your dummy. Print Settings: Supports: Yes. Infill: 15% or higher Material: Any Hard (PLA, ASA, ABS, PETG, and NOT TPU or other non-rigid materials.…
Mount for hanging a Greenworks 40V battery on a 3/4" (or 20mm) french cleat. Prints well as oriented in the STL. No supports necessary, low infill. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
crankbrothers cleats alignment tool left and right shoe in 1 Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Infill: 15% Category: Tools
Inspired by https://www.printables.com/model/187763-festool-tanos-makita-hitachi-systainer-cleats , the size doesnt fit my need so I measured and made my own. My primary usage is to dock the Milwaukee debris separator on the Festool dust…
Easy to print, no supports. Orientation on printbed so it doesn't have overhangs.
This is a really simple modification of the existing french cleat system provided by the (Un)Original Prusa Drybox. (See Accessories here, the cleat and the bumper) This modification is just to distance the drybox off the wall by ~25mm to…
Dies ist ein Remix für den Kobra 3 V2 mit und ohne Löchern zum Befestigen mit Klebeband oder Schraube. This is a Remix for the Kobra 3 V2 with and without holes for mounting with tape or screws. Please post a Make! It helps very much!…
The Large Plastic Insert System for golf cleats was used by Foot-Joy prior to 1999 and Dexter prior to 2000. Replacement cleats that fit these shoes are no longer available. I designed these as a replacement. It's a two part system where…
3 additonnal files to make installation of the cleats easier: A new template to print in A4 format to mark the position of the screws on the board A full view of the board with the position of the cleats and screws. 3D model of the…
If you have rugs/runners on carpet, you know that they will tend to migrate across the floor like an inchworm. It's especially bad on deep pile carpet, which is what I made these for. The shown cleats are all 5x5 cleats with an 8mm peg…
Holds 9 Generic ESD Tweezers and hooks right up to a french cleat system
Simple, single screw cleats for window pull cord. I filled the screw hole with color matched putty after installing. I needed two different heights for different mounting locations. Please share your Make:) Like the freebie? Feel free to…
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) Remix of https://www.thingiverse.com/thing:3027018 , just with cleats added. This thing was made with Tinkercad. Edit it online…
printable screw in DIN rail replacement for Voron 0
An adapter that lets you make use of old (and new) totes laying around in the garage with your french cleat system. This adapter also suits much larger totes with a heavier load. Just add an additional adapter or 2. Angle of the cleat is…
Title says it all. Any stiff material will work. PLA set have lasted for years. Though it may not seem like it, it is best to print on its side. Minimizes various distortions and maximizes relevant strength (length wise and screw hole)
Simple hexbit holder, FreeCAD (1.0) files provided if you need to modify. I wanted to make them stackable for the set I keep in the tool cabinet instead of on the cleat wall. I assembled mine with ¾" #6 SPAX wood screws, but most small…
I have printed these on the flat sides with no issues. Do use supports since they will be needed for the holes. I have used silk PLA with no strength issues as far as I can see.
DISCLAIMER USE AT YOUR OWN RISK 9-10 US soccer cleats Comment your foot measurement in inches or mm for a custom size (standard shoe size will be ignored; eg 4,5,6,7,8,9,9.5, etc). Measure your actual foot length from big toe to heel.…
My daughter asked me to make her a cabin bed. Since she already has a bed, I just made a structure of cleats connected by 3D printed connectors. The whole thing is covered by a canopy that also acts as a mosquito net. Phosphorescent stars…
Printed these on their flat side for best strength. These are only as good as the material and process you use. Do not use 3d printed parts for overhead or critical loads.
Gives you the possibility to store your Keo plate cycling shoes on Skadis wall organizer
Remix of Geoff's Voron 0 DIN cleat to widen it enough to hold a Raspberry Pi 0 and a U2C on the same side.
Cleats i made for mounting 120mm fan to 3d printed vent flaps without any hardware except metal tek screws. Category: DIY
Mit dieser Halterung könnt ihr eure Radschuhe an die Wand hängen. Ich habe darauf geachtet, dass sich die Schuhe einfach einhängen lassen. Die Halterung wird mit 2 Senkkopfschrauben mit einem Durchmesser von 3 mm befestigt. Ich selbst…
A simple round design for a cleat. Use 3*20 screws, the dual hole side should be fitted to a vertical panel. I've also included two single-bored version, one of them is extra strong. SCAD code is super simple and easy to adapt. Might be…
It’s an easy-to-print holder created to mount cycling shoes with Time ATAC cleats onto the openGrid board. I designed it primarily for ATAC EASY 10° cleats. The holder keeps the cleats parallel to the board’s surface. Credits to David D…
I was getting some numbness when cycling. I felt uneven pressure on the outside of my foot, so I figured that an angled shim would help even out the pressure. It worked fairly well. When I finally went in for a professional bike fit, the…
Small, medium and large sized cleats for small boats (canoe, kayak etc) or for use around the house/shop. pics coming soon Category: Hobby
Hang them on the wall, fasten them to roller bases or whatever you'd like.
A hidden inner corner fastener/cleat for a picture frame deck corner that still allows for some wood movement in the lengthwise directions. The corner fastener should be mirrored for the other orientation. Also an angled edge fastener.…
Print with 20% infill and 4 walls. Use small flathead countersunk screws to fasten to board.
Cleat mounting cable magnetic organizer to hide the 3M attachments. Cleat tolerances might be tight enough to not require screw securing. If not, I use 3x5mm flush screws. Printing the cable organizers with a flexible filament would be…
Printed these on their flat side for best strength. These are only as good as the material and process you use. Do not use 3d printed parts for overhead or critical loads.
Dies ist ein Remix für den Kobra 3 V2 mit und ohne Löchern zum Befestigen mit Klebeband oder Schraube. This is a Remix for the Kobra 3 V2 with and without holes for mounting with tape or screws. Please post a Make! It helps very much!…
Mit dieser Halterung könnt ihr eure Radschuhe an die Wand hängen. Ich habe darauf geachtet, dass sich die Schuhe einfach einhängen lassen. Die Halterung wird mit 2 Senkkopfschrauben mit einem Durchmesser von 3 mm befestigt. Ich selbst…
