Festool / Tanos / Makita / Hitachi systainer cleats (Classic Line systainers)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Festool systainer cleats for old style systainers. Should be compatible with Hitachi and Makita systainers as well,…
- Ocena
- 0 / 5
- Polubienia
- 125
- Pobrania
- 565
- Wydruki
- 0
- Wyświetlenia
- 5131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Festool systainer cleats for old style systainers. Should be compatible with Hitachi and Makita systainers as well, but have only tested on Hitachi.
Can be used to attach a custom MFT style board to top case. Beware the existing classical attachment clips stick up a bit above the cleats, so the custom MFT board needs to be cut accordingly.
The proposed printing guidelines appears to be plenty strong. I had no problem lifting 3 systainers weighing 21kg.
You will need 16x 3.5x25mm screws.
Please post makes and submit likes if you use and enjoy this thing. Thank you.
Print Settings
Printer Brand:
FlashForge
Printer:
Dreamer
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Infill:
10%
Notes:
Printing is straight forward using the flattest face down. Re-orient if needed.
Printed in PLA. I Sliced using Simplify 3D, but any slicer should work fine.Infill can be sparse, I set mine to 10%. I also a 50% overlap between infill and shells.
After some research, it appears that good strength is more due to the thickness of the shells and layer orientation than the infill. Print with at least 5 top and bottom layers & 5 perimeters shells for good strength. The forces go mostly into compression, and much less into torsion. The holes are for 3.5mm counter sunk screws.
How I Designed This
Fusion 360
Category: Tools