1 / 10
Festool / Tanos / Makita / Hitachi systainer cleats (Classic Line systainers) — image 1
1 / 10

Festool / Tanos / Makita / Hitachi systainer cleats (Classic Line systainers)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Festool systainer cleats for old style systainers. Should be compatible with Hitachi and Makita systainers as well,…

Rating
0 / 5
Likes
125
Downloads
565
Makes
0
Views
5,131
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Festool systainer cleats for old style systainers. Should be compatible with Hitachi and Makita systainers as well, but have only tested on Hitachi.

Can be used to attach a custom MFT style board to top case. Beware the existing classical attachment clips stick up a bit above the cleats, so the custom MFT board needs to be cut accordingly.

The proposed printing guidelines appears to be plenty strong. I had no problem lifting 3 systainers weighing 21kg.

You will need 16x 3.5x25mm screws.

Please post makes and submit likes if you use and enjoy this thing. Thank you.

Print Settings

Printer Brand:

FlashForge

Printer:

Dreamer

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Infill:

10%


Notes:

Printing is straight forward using the flattest face down. Re-orient if needed.

Printed in PLA. I Sliced using Simplify 3D, but any slicer should work fine.

Infill can be sparse, I set mine to 10%. I also a 50% overlap between infill and shells.

After some research, it appears that good strength is more due to the thickness of the shells and layer orientation than the infill. Print with at least 5 top and bottom layers & 5 perimeters shells for good strength. The forces go mostly into compression, and much less into torsion. The holes are for 3.5mm counter sunk screws.

How I Designed This

Fusion 360

Category: Tools

Tags