1 / 3
Spools for electrical wire roles
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model provides a design for a wire holder spool which prints in two pieces which can be pressfit together.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This model is a parametrized design for a spool for smaller wires or alike which prints in two identical halfes which can be press-fitted together.
The attached FreeCad file is provided with a few parameters that can help to tweak the design to your needs:
| Parameter | Description | Default |
| wheel_dia | The outer diameter of the spool | 50 mm |
| inner_dia | The inner diameter of the spool | 25 mm |
| rod_dia | The diameter of the cutout for a rod in the middle | 10 mm |
| base_height | The height (= width) of the inner cylinder (please be aware that the final dimension will be twice that size (due to the two halfes put together) | 10 mm |
| side_height | The height( = width) of the outer wheel | 1.5 mm |
| fit_gap | The tolerance for fitting the two halfes (please adjust this to your printer) | 0.2 mm |
The model's repo can be found on https://github.com/chof747/wire-rolls