1 / 3
Spools for electrical wire roles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model provides a design for a wire holder spool which prints in two pieces which can be pressfit together.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
This model is a parametrized design for a spool for smaller wires or alike which prints in two identical halfes which can be press-fitted together.
The attached FreeCad file is provided with a few parameters that can help to tweak the design to your needs:
| Parameter | Description | Default |
| wheel_dia | The outer diameter of the spool | 50 mm |
| inner_dia | The inner diameter of the spool | 25 mm |
| rod_dia | The diameter of the cutout for a rod in the middle | 10 mm |
| base_height | The height (= width) of the inner cylinder (please be aware that the final dimension will be twice that size (due to the two halfes put together) | 10 mm |
| side_height | The height( = width) of the outer wheel | 1.5 mm |
| fit_gap | The tolerance for fitting the two halfes (please adjust this to your printer) | 0.2 mm |
The model's repo can be found on https://github.com/chof747/wire-rolls