1 / 4
K1/K1C Print-In-Place Hinges (By Mordiev) for use with 20mm SIDE SPACER VENTILATION (by LEOTE) — zdjęcie 1
1 / 4

K1/K1C Print-In-Place Hinges (By Mordiev) for use with 20mm SIDE SPACER VENTILATION (by LEOTE)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model mashes two excellent parts together. You no longer have to pick one or the other!

Ocena
0 / 5
Polubienia
13
Pobrania
53
Wydruki
0
Wyświetlenia
480
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This model combines the print-in-place hinges by Mordiev with the 20mm side spacer vents designed by LEOTE. It is my attempt to incorporate both the side vents (by LEOTE) and an expanded swing angle for the K1C door (by Mordiev) on the same unit, because I didn't want to settle with one or the other.

Important Information

The section of the corners where they attach to the vertical vents will require the removal of material. I did this with a knife and snips, but a thin file may also be used. Simply remove the lip on the ring and check the fit; repeat as necessary until the desired fit is achieved. I will continue to work on the model and post an update as soon as I find a way around this.

If you use this model, please post a make. Happy printing!

Tagi