SV08 H Frame Dock Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BEEFY Tool Dock Bar for the SV08
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 1808
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Super beefy tool dock for the SV08. Do you need a dock bar that doesn't move and you can lift the entire printer with? Well this is the one! Requires 3 pieces of 2020. Also supports a brush…or not if you don't want one.
WARNING - You will loose some space up front depending on the toolhead you're using! With the AntHead I lost about 10x10mm in each of the front corners.
Recommend Mitsumi 2020 or similar profile. I'm unsure if this will work with V-Slot. I had some spare Mitsumi Profile 2020 from a Voron frame kit and this is what I used.
BOM:
| Item | Quantity | Description |
|---|---|---|
| 444mm 2020 | 2 | Verticals |
| 393mm 2020 | 1 | Horizontal |
| M5x10 | 4 | Holds Verticals to printed pieces |
| M3x20 | 4 | Holds Top Print to Top Extrusion |
| M3 Threaded Insert | 2 | Optional if using brush |
| M3x6mm | 2 | Optional if using brush |
Pieces should be printed in a material to withstand whatever temps they'd experience in a chamber.
No chamber? PETG should be ok but the contact area with the bed may be worrisome.
Chamber? Recommend ABS/ASA…MAYBE PETG
Print with 4 perimeters, 4 tops and bottoms and 20% infill.
Connect the horizontal with your preferred method. You can do blind holes (requires pretty precise fit) or you can use 2020 corners… I used these.
Pieces are oriented as they should be printed. Top pieces will need minimal support.