Custom mod Reinforcing Dygma Defy in Position D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Love Position D on the Dygma Defy but tired of the wobble? This mod reinforces the layout without changing the angle.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 449
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I love using Position D on my Dygma Defy — it’s the most natural and ergonomic layout for me.
However, I found it a bit wobbly during daily use, especially when typing with more force or moving the keyboard around.
So I designed a reinforcement mod that keeps the original angle but adds rigidity to the structure.
🛠 Key features:
Fully preserves the original Position D angle
Mounted using heat-set inserts and screws for maximum stability
Modeled based on a partial 3D scan of the Defy for perfect fit
Printed in multiple materials for best performance:
Main arms in PLA
Grip pads in TPU for friction
Brackets/mounts in PA-CF (nylon with carbon fiber) for strength
Contact surfaces gently sanded with fine-grit sandpaper (400–800) to increase friction
Compatible with 3.5×5 mm heat-set inserts and 2.5×8 mm screws
🖨 Works great with standard print settings. Supports may not be needed depending on your printer.
🧪 If you don't have PA-CF, you can replace it with PETG or PLA+ for durability, though stiffness may be lower.
If you use Position D and want a rock-solid typing experience — this might be for you.
Let me know if you have ideas for improvements or want a remix!