1 / 4
Ford Ranger Center Box Tray - Next Gen (UK) - 2023+ Models — zdjęcie 1
1 / 4

Ford Ranger Center Box Tray - Next Gen (UK) - 2023+ Models

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A organiser tray for the center box of the ford ranger. 2 trays, cutout to allow taller charger plugs and a coin holder

Ocena
1 / 5
Polubienia
19
Pobrania
375
Wydruki
0
Wyświetlenia
1931
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A organiser tray for the center box of the Ford Ranger 2023+ models.


2 trays, cutout to allow taller charger plugs, cutouts for wire runs and a coin holder designed to take all british coins (i am sure other coins would fit but i designed the cutouts based on british coin sizes as they are what I have to hand).

The tray fits very snuggly which is required as theere are two lugs on the box lid which need to be allowed through the design.

The hole in the center divider allows for easy removal.

The outside border is 2mm tall on the standard version, this allows the box to clip on my vehicle but it does require more positive pressure than without the tray. I have reduced this to 1.5mm on the slimmer version which should allow for easier closure but I havent tested this for strength.

Print requires support. I used snug support structure.

I printed using a 0.6mm nozzle at 0.35 layer height in ABS or ASA.

Note: this will probably require higher temp materials like ASA or ABS to withstand hot car temperatures without warping.