1 / 4
Ford Ranger Center Box Tray - Next Gen (UK) - 2023+ Models — image 1
1 / 4

Ford Ranger Center Box Tray - Next Gen (UK) - 2023+ Models

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A organiser tray for the center box of the ford ranger. 2 trays, cutout to allow taller charger plugs and a coin holder

Rating
1 / 5
Likes
19
Downloads
375
Makes
0
Views
1,931
Reviews
1

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

A organiser tray for the center box of the Ford Ranger 2023+ models.


2 trays, cutout to allow taller charger plugs, cutouts for wire runs and a coin holder designed to take all british coins (i am sure other coins would fit but i designed the cutouts based on british coin sizes as they are what I have to hand).

The tray fits very snuggly which is required as theere are two lugs on the box lid which need to be allowed through the design.

The hole in the center divider allows for easy removal.

The outside border is 2mm tall on the standard version, this allows the box to clip on my vehicle but it does require more positive pressure than without the tray. I have reduced this to 1.5mm on the slimmer version which should allow for easier closure but I havent tested this for strength.

Print requires support. I used snug support structure.

I printed using a 0.6mm nozzle at 0.35 layer height in ABS or ASA.

Note: this will probably require higher temp materials like ASA or ABS to withstand hot car temperatures without warping.