1 / 2
Patio Swing Canopy Screw - M8 — zdjęcie 1
1 / 2

Patio Swing Canopy Screw - M8

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M8 threaded screw with knob for outdoor patio swing to mount the canopy.

Ocena
0 / 5
Polubienia
4
Pobrania
34
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Printed in Elegoo PLA+ @ .22mm layer height, 210c, 60c bed. Probably way overkill but 10 vertical/horizontal shells at 1mm thickness and 100% infill. It was printed in knob down orientation with no supports but would likely be best printed sideways if possible for better strength. Standard M8 thread, total length is 55mm. 

Tagi