194 modeli
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Volleyball medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is…
I loved the version @Pippa made but wanted to also give the option to pull a zipper if needed, so I added a hook on the other end. It's sturdy enough that I could pull up my jean zipper (sorry about that POV) lol. I wouldn't go yanking on…
print 2x the side and 3x the pins to be able to print without needing supports. I just used super glue to combine the parts. I have also included the tool as a single model, as that was how I first made it
Got a new patio umbrella and lost the protective ring for the glass patio table.
This cup holder was designed to mount to a patio chair. The current mount fits a 28mm pole. The one in the picture is printed with PET-G and holds up very well in the Texas sun. The cup_holder_with_mount.stl combined with…
Blank medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. 0.20 layer height 0.40 mm nozzle 15% infill medal is 4 mm total thickness, engrave to 1…
This model is a plug to be used on a patio light stringer to fill an empty socket. This will give a set of light stings a much more finished appearance, will prevent debris from accumulating in the sockets, and will prevent accidental…
Soccer / Football medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation. 0.20 layer height 0.40 mm nozzle 15% infill…
button aid - helps close buttons for people with arthritis or limited use of their fingers. prints in 30 minutes no supports
If the door needs do be adjusted, the handles break before the screws damage the frame of the door, so sometimes you need them new. This part does not fit to the original base, because I needed to make the groove bigger then the original,…
Basketball medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is…
We have several of these highly effective little devices, but unfortunately only one of them came with a lid. As it tends to accumulate a little residue on the surface during use, it's nice to be able to cover it before putting it away.…
Getting the patio ready for spring, the ring for my patio table fell apart. This fits perfectly into the standard hole of a table and is a quick easy replacement.
I have several patio umbrellas and heavy under-table stands. The stands all accept poles with a much larger diameter than the diameter of the actual umbrella poles. This results in umbrellas that are difficult to hold in place with the…
The opening in this version is 40mm diameter which I found was a good size for a 38mm umbrella, not a tight fit that would strain the material but enough to hold the umbrella straight. I printed in white PETG as this is being used outdoors.
After 30 years, the rings holding the legs together on a Sunbeam patio table started cracking and coming apart. I have designed this replacement part to be a drop-in replacement, using all of the original screw and nut hardware, with the…
Tennis medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is 4…
Baseball / Softball medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill…
Needed to fix my patio umbrella. Two of the arms broke after the wind knocked it over. Just needed to use some M5x35mm bolts with some washers and nuts. I used some nylon washers since it's supposed to be able to to articulate when…
Golf medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is 4 mm…
This is a simple remix of Henlor's extruder cover, optimized for SLS and SLM printing.
Bungee ball bracket for patio shades. I designed this so I could have bungee ball holders at different heights. Mid height allows you to see your yard but offer privacy. Lowest height helps with weather protection. The replacement bar end…
My Original Prusa Enclosure had a bit of echo when printing so I wanted to try the concrete patio slab/paver ‘mod’ to quiet things down and it seems to help. I already had a 45x45cm concrete patio slab/paver that I was using before I got…
This is an insert to support the umbrella for our patio table. These support both the umbrella in the holder on the ground as well as aligns the umbrella at the table hole. This is a simple design, but I have provided .STP files so you…
Get those paper towels off the table and out of eye level while still making them easily accessible. This mount is designed for a 1.5" diameter patio umbrella pole and holds up to a “triple” size roll of paper towels. Attach it high to…
Patio Block Interlocking puzzle by Stewart Coffin (STC #82) Assemble the eight pieces into a 4x4x4 cube. Patio Block is classic Stewart Coffin: a simple, elegant idea gives rise to an unexpectedly challenging assembly puzzle. Coffin wrote…
Decided to add ear protection to this poor Goblin, just doing his job to make your dungeons a tad safer. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20% Triangle Filament: Form…
Uses 3/8" mounting bolts to attach holder & spacer to deck rail, with additional #8 deck screws for securing the spacers. Upper mount requires 1x 5/16 bolt and wing nut to adjust clamping. Update : -after 1 year in service this has held…
Tees to convert hanging lights that just have two wires coming out of the top into a Tee style hanger that can be clipped on to a supporting wire. I'm specifically using these for Govee Outdoor String Lights H7021 The AutoDesk Fusion file…
This simple two-piece mount holds a Thermacell E55 Mosquito Repeller (links below) without blocking chimney for functional airflow. May also work on other Thermacell E Series Repellers but I don't have any to test (if it does, let me know…
Football (American) medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill…
Replacement protector for umbrella hole in a glass patio table. Fits a 36mm diameter umbrella pole (center hole is 38mm) with a 50mm hole in the patio table. Printed in black ASA on a textured bed.
Hang Christmas or bistro-style lights along the upper edge of a block wall fence without drilling holes in the wall. For block walls 4" (~100mm) to 6" (~150mm) deep, print one Front and one Rear part each. For block walls from 6" (~150mm)…
Designed this heavy duty bushing when the original cheap plastic one that came with the table broke. Made of 2 pieces that screw together onto the glass patio table top. Easy print, made it out of PET-G.
Two pieces Recommended Print Settings Print Orientation: Default as modeled for the bottom, Top down for the top piece. Material: PLA Layer Height: 0.20 mm or less Infill % : 15% or more Supports: None Raft: Optional Brim: Optional
A simple hook to go on to the handles of a set of Patio/French doors to keep them from blowing in the wind when you don't want the doors fully open. It was printed using Creality Hyper PLA with the following parameters: - Standard…
This part is to replace one side of the adjustable plastic clamp that holds the canopy at different angles. The flat adjusting turn knob on the bolt that goes through, can be loosened and tightened against this part to allow the canopy…
Needed a way to mount my Thermacell to one of my outdoor light timber stands. Great way to get it off the table to prevent being tipped over. I have printed this in CF PETG and haven't had any issues with warping outside even in direct…
Avoid surface discolouration under plant pots due to moisture build up. Designed to fit on a 230x230mm bed. Scale as requried.
A simple hook to go on to the handles of a set of Patio/French doors to keep them from blowing in the wind when you don't want the doors fully open. It was printed using Creality Hyper PLA with the following parameters: - Standard…
Heres a hook I made to fit in the gap under my patio roof to hold string lights. Wedge it between the roof and the supports. Each corner is a different height so it should wedge in there pretty snugly. Hang your lights. Enjoy!
Fits Patio sets with 180 mm inner diameter between legs. 4 legged model.
Bowling medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is 4…
This is a slimline door handle for patios and balcony doors where space is limited due to a fly screen. Its only 8mm thick and very stable. Easy to print, because it lays flat on the bed.
The door handle broke years ago and I had a piece of painted pine in it's place after buying and returning a few poorly fitting replacements. I got tired of looking at the pine handle and it was a good excuse to buy ASA filament. I used…
Over the years, several exterior door handles on the doors to the balconies and terraces of our house were broken. In addition, the original handles were always annoyingly in the way when cleaning windows. As a replacement, I designed a…
Probably very niche but thought I'd upload it anyways since I made it. It is for an umbrella parasol base off Amazon called “URBNLIVING 18L White Anthracite Garden Patio Plastic Umbrella Stand Sun Shade Parasol Base”. The adapter that…
Print in the orientation that it loads in as. Can print from any plastic, but I used a firm TPU for durability. (High Speed from Overture) I also greased the threads good with dish soap since tpu can be a little too grippy for threads.…
This is my clip on umbrella light. There are 4 versions of this clamp inside. There is a tilted and straight version both with a solid or open bottom. They will light up your patio umbrella and look spectacular. The "Open" version on the…
This umbrella reducer will allow a smaller diameter umbrella pole to fit snugly in your patio table. It's designed for a patio table cutout of 2" (actual diameter 48mm), which fits an Ikea Äpplarö table. The umbrella cutout is sized for a…
I suggest PETG for outdoor use & High Layer count at Bottom Layer
Simple mount for a 48mm pole and reflector with 78mm spaced holes. Uses 4 M8x50 screws and 4 M8 nuts.
This pot will fit between the rails on a fairly standard apartment patio railing. The vertical rails need to be ~87.5mm apart with a depth and width of ~13.5mm. You can easily slide the mounting part of the pot between two rails while it…
A few of the feet on my patio swing have cracked over the years. I don't know when it was originally purchased (I think it's a hand-me-down from family), so buying replacement feet is out of the question (not to mention I have a 3D…
Clamp Clamp incorporating a compliant mechanism, printable without support. Produced in 24 hours for the third edition of the 24H 3D Print Polytech Tours . This model responds to two themes simultaneously proposed during the competition:…
A patio door handle for a friend of mine. One part is for heat inserts. The other one for screws.
Restore worn or damaged patio armrests with this simple and effective Armrest Repair Cover. Designed to slide over the corner, it neatly hides imperfections while protecting the surface from further wear. Its angled, minimalist shape…
A key-holed peg board with box and pegs for Occupational Therapists to use for wrist motion exercises. 16 holes on the board in random rotations require the patient to use a variety of different angles. Two different peg shapes are…
Hallo, ich habe einen einfachen Terassentür Griff entworfen. Ich habe ihn mit sehr starker Wandstärke und sehr dichtem infill gedruckt. Hello, I have designed a simple patio door handle. I printed it with very thick walls and very dense…
Growing melons in pots on a patio or balcony can lead to the fruit resting directly on hard tiles or compact soil, which risks bruising, rot, or uneven ripening. This 3D-printed pad is designed to gently cradle your watermelon (or other…
A hook for our patio roof to hang lights from
Tired of feet on my outdoor chairs from Jula loosing their feet's and then making huge gauges in my outdoor deck.
Each year I run a Black History Daily Trivia game for K-8 students in Illinois. This was created as a small keepsake.
When cheap plastic crap from Menards breaks and you need a replacement, you make your own! I redesigned this a few times for the 1.5 inch umbrella pole, and the sleeve to fit just right in the base. The longer length helps keep the…
Medical Bottle Small bottle with glass and compartment for storing tablets. Made in 24 hours for the second edition of the 24H 3D Polytech Tours . It responds to the theme of medicine, with the aim of making it easier for sufferers…
Inspired by wooden planters sold at big box stores, as well as wanting a cohesive look for my garden and more space on my balcony, I made these repurposed pallet wood planters to hang over my balcony railing. List of Components: Pallets I…
Wrist and forearm pronation/supination tool. Ribbed handle for grip and comfort. Includes a grooved channel around exterior for wrapping the tool in therabands, theratubes, straps, etc. to add resistance to the exercise. 8cm depth…
Needed a new set of patio door handles for a sliding patio door. Desinged these in fusion 360. They print out strong and strudy, Only alreration that was required was i had to cut the pegs to size, deliberatly did them longer so i could…
Love my Tiki style lights for my patio. But hated that they would blow off the railing with a decent breeze. So I decided to make something to anchor them better to the railing. See a need fill a need, right? Here is my take on a base…
I recently injured my wrist and needed to go to occupational therapy for a few months. One of the exercises my therapist had me do was bending sticks. This exercise that involved the sticks was two parts. First, take the edges of the…
Got a new resin folding picnic table and umbrella. Noticed the umbrella was kinda loose in the center and moved a bit much even with a base holding it at the bottom. Designed this to fit around the umbrella pole and slide into the open…
At 30 years old, the plastic feet on some aluminum frame Sunbeam patio chairs were cracking and breaking apart. This replacement part is designed to attach to the chair using the original screws, and is much more solid and durable than…
All slug traps i could find had to be put into the group, but im having a slug issue on my patio, so i needed something a little different. So with this model, i simply clamp a tray with poison on to my patio (to keep it from flying away…
Patio table parasol adapter ring. Very easy to assemble, no need to remove your parasol. Made for a 4mm thick table with a 51 mm hole and a 38mm dia parasol. Printed with PETG to resis the UV of the sun. You will need 4 M3x12 socket head…
This button replaces the broken molded button on an old Ikea patio umbrella. Printed in PLA with a 0.2 layer height.
I cut a custom hole in a tile for a table top with an umbrella. The hole was ugly, so I remixed this plug to make a cap. We also needed a base plug to stabilize the umbrella in the base of the pipe.
Change the parameters in the enclosed .f3d to match our table/umbrella. Wood PLA Filament was expending on the XY plane, made the ring smaller/thinner. Since it is not structural, outdoor exposure is not a concern. Beside it is a…
Fits poles up to 24 mm (≈ 1 inch) – the slightly tapered bore grips even thinner poles securely. Four 5 mm mounting holes for standard wood screws; mount left- or right-handed. Weather-proof when printed in PETG or ASA – perfect for…
A quick print to make footers for some old patio chairs that the feet have worn down due to age and use. Epoxied these to the remains of the old feet. Modeled in Fusion 360, printed with PLA - we'll see how long they last.
A secondhand set I acquired was missing 2 leg end caps so I drew one up and printed in ASA. I have no idea of the manufacturer or model but I've included a pic. They are cast aluminum with Sunbrella brand (there is a tag) fabric slings.…
No matter which patio table you buy, the umbrella bushing always seems to give up after a week. That ends now. Meet the perfect replacement — a precision‑printed TPU bushing that installs in seconds, stays quiet, shrugs off the elements,…
This is a durable press-fit end cap for patio umbrella poles, designed to protect surfaces and prevent wear from exposed metal edges. The cap fits inside the pole and features a slightly flexible wall for a snug friction fit. An…
This is a cap to cover the hole in your patio table where the umbrella would go. I made it initially to fit a specific table but it turns out they are pretty universal and it has fit all 3 tables i have tried it on. I think it will very…
This is a replacement foot for lawn furniture. Specifically, it was made for a Sundrella lawn chair with a frame of round aluminum tubing having an outer diameter of 1”, or 25mm, and an inner diameter of approximately 21.4mm. I printed…
We were in need of a few cup holders for some patio furniture. This is what I came up with! Simply clips on and is durable and easy to print. 4 wall loops, .2 layer height, tree supports enabled and 25% infill Thanks for looking! Let me…
This is a replacement slider bracket for a common type of patio/garden sun umbrella (cantilever parasol). The original plastic parts are prone to breaking under load or UV exposure, and finding a spare part is almost impossible. I…
Replacement door handle for balcony/patio door with low profile design. Includes space for lock mechanism. Screw holes are 125mm apart. Printing Instructions: PETG 4 walls 15% gyroid infill With supports
The sliding patio doors on our sailing catamaran (2003 Privilege 465 EC) were no longer functioning properly in that they were hard to slid open and closed. I took the doors off and discovered the bearings on the wheels had failed and the…
If you have a Wood Pellet Products Big Timber Patio Heater you may have experienced the "key" which is the shutoff for the pellets falling out (it only stays in based on friction from the pellets, but it sometimes still falls out). So I…
Put this on patio chair feet to help prevent them from sinking into the ground. Enlarges a 20x40 foot to be 40x80.
I have a friend that has a round glass patio table that lost one of the table top supports. The support is 40x45 mm that locks into the rim and supports the glass table top. I have a picture of the original as well as the one I made from…
Made from TPU these feet outperform the original feet. The large feet surround the furniture foot and eliminate the concern of rust rings on the patio (see photo). The small feet fit the associated tables and are otherwise hard to find.…
Bring some humor and personality to your outdoor space with this “Patio Vibes Require Vodka!” decorative wall sign. Designed with a sleek black backing and raised purple lettering, this model creates a bold, eye-catching contrast that…
I made this Tile Spacer for patios/decks for tile laying into gravel bed or sand during my garden project of laying a tile ground for my outdoor kitchen Attached you'll find the cross version as well as the T shaped version of my spacer.
After noticing my patio umbrella starting to leave marks on our new wooden deck, I designed this custom base in Fusion 360. It sits directly under the pole (as shown in the real photos), evenly distributing the weight while keeping the…
A simple, quick-to-use, and non-destructive outdoor door holder designed to keep your patio/balcony door temporarily shut without getting locked outside. Perfect for stepping out to enjoy a coffee, hang laundry, or tend to your garden…
Last year, I backed a Kickstarter for a fun-sounding card game called Bar Fight, by Bacchanal Games ( https://www.bacchanal-games.com/ ). In the game, you keep track of score by earning Participation Ribbons for making the best drink of…
![Clamp [Participation : 24H Polytech 3D Print Tours 3rd Edition]](https://media.printables.com/media/prints/892867/images/6879185_447a3522-7b25-4d68-b58d-30d02bfbe250_dbf41c7f-7a7a-45cb-bfef-b707d410170e/clamp-0-presentation.png)
![Medical Bottle [Participation : 24H Polytech 3D Tours 2nd Edition]](https://media.printables.com/media/prints/892861/images/6879172_31e68c6a-0003-46f6-ab92-e1b056bc0eb7_1e65484f-aa88-461f-a109-2763a4982aed/bottle-0.png)
