1 / 5
Patio Umbrella Holder for Raised Beds & Railings – rugged 3D-printed clamp (Ø 24 mm) — zdjęcie 1
1 / 5

Patio Umbrella Holder for Raised Beds & Railings – rugged 3D-printed clamp (Ø 24 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This 3D-printed clamp turns any raised garden bed, balcony railing, or wooden board into a rock-solid umbrella holder.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
1
Wyświetlenia
125
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Fits poles up to 24 mm (≈ 1 inch) – the slightly tapered bore grips even thinner poles securely.

Four 5 mm mounting holes for standard wood screws; mount left- or right-handed.

Weather-proof when printed in PETG or ASA – perfect for permanent outdoor use.

 

🛠 Installation

Position the bracket where you want shade.

Mark the four holes, pre-drill with a 3 mm bit, and secure using 4 × 50 mm wood screws.

Optional: add a thin foam/rubber pad between wood and bracket to dampen vibration.

Insert the umbrella pole – the taper keeps it wobble-free.

 

💡 Tips & Tricks

Need a larger pole? Uniformly scale the model in your slicer.

Color swap: Prusament PETG “Signal Orange” stands out; grey or brown blends with wood.

Tagi