ifixit Manta underdesk holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Underdesk holder with lip to prevent accidental slide out
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
Simple ifixit Manta kit holder for under desk mounting. Small lip prevents accidental slide out of the kit.
Printing
Print 2 parts. One in correct orientation, one mirrored.
Mounting
All you need is 4-6 screws with diameter up to 4mm and screwhead with maximum diameter of 8mm. Large holes (10mm) serve for easier screw-in using screwdriver; feel free to expand these holes 1-2mm to fit larger bit drivers or mantas large bit driver (source file from openSCAD included).
I mounted one half and then marked second half position using manta box itself as spacer. In solid wood desk 4 screws are more than enough.