1 / 1
Matchfit Router Plate for Bosch Dewalt Routers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a plate that attaches to the Bosch 1617 Router or the Dewalt DCW600 Router for Matchfit
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 768
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (48)Powiązane
This is a plate that attaches to the Bosch 1617 Router or the Dewalt DCW600 Router. It has a guide for Matchfit grooves, so after you create your first relief cut, the cutout in the router will fit in the groove to guide the rest of the cuts that are 4 inches on center.
Make sure to route ALL the relief grooves first, then go down the line with your dovetail bit.
