1 / 3
K1 Max Drag Chain Bowden Tube Clip Light
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lighter version of a drop in replacement of original K1 MAX bowden tube mount.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 836
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (27)Powiązane
This is a lighter version of my original clip from here. I shortened the clip on the left side. This resolves an issue on my printer with a sagging cable chain and these clips hitting on the XY joints and Y rods. I upload two versions:
- standard one that has tighter clearances and is harder to fit in but once fitted stays on the chain with no movement and wobbling
- v2 with looser clearances so it's much easier to fit in. Drowback is that is a little bit on the loose side on the chain
I recommend printing both and choose which one you prefer.
