1 / 4
ECAS Pico MMU Hub fits Oribiter, and Sherpa Mini
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added ECAS to the Pico MMU Hub
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 270
- Wydruki
- 1
- Wyświetlenia
- 1522
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 6)Remiksy (2)Kolekcje (81)Powiązane
Modified the 4 lane Pico MMU Hubs to use ECAS04.
I wanted a easier way to disconnect the PTFE tubes because I'm constantly changing things on my printer. This also prevents the PTFE tubes from popping out.
I've also optimized the filament path for each lane, now there is practically no resistance.
Printing:
Noted I've only printed and used the Sherpa Hub, also I use OrcaSlicer so I'm not sure if all settings will work in other slicers.
- Make sure to rotate the STL 90 in the x axis, as in the 3mf file
- Use a ≤15 degree support angle to not print supports for the top part of the hub
- Use ≥16 degree support angle to print supports for a better finish.
- I cut the hub and changed the top part infill to 15% in the 3mf to save on weight, filament, and print time.
Model:
I can add other mounting methods from existing Pico MMU Hubs (If a STEP file is available), so please let me know
