1 / 2
3dk.berlin Spool Filament Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips to keep your filament tensioned. They clip to the inside of an 3dk.berlin spool and stay there.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
An inline filament clip for 3dk.berlin spools.
The clip weighs roughly 1g and the filament can be clipped-in/removed without removing the clip.
The clip can remain inside the spool.
Spool Variants
| Image | Name | Hole Distance |
 | LL | 46mm |
 | XL | n/a |
Printing
- 100% infill
- print nipple up - lay flat on face with filament recess
- recommend layer height between 0.20mm to 0.40mm
- good with 0.6mm nozzle but everything else works too
- no supports
- wall generator: classic
- with smooth printbed, edges of filament recess will melt a bit inward, holding the filament even better. You might have to thread it in and not be able to push it in from the side.
- with textured printbed, there is no inward melting, you can push the filament in from the side.
Credits:
Inspired by many other great clips of this sort.