1 / 2
3dk.berlin Spool Filament Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clips to keep your filament tensioned. They clip to the inside of an 3dk.berlin spool and stay there.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
An inline filament clip for 3dk.berlin spools.
The clip weighs roughly 1g and the filament can be clipped-in/removed without removing the clip.
The clip can remain inside the spool.
Spool Variants
| Image | Name | Hole Distance |
 | LL | 46mm |
 | XL | n/a |
Printing
- 100% infill
- print nipple up - lay flat on face with filament recess
- recommend layer height between 0.20mm to 0.40mm
- good with 0.6mm nozzle but everything else works too
- no supports
- wall generator: classic
- with smooth printbed, edges of filament recess will melt a bit inward, holding the filament even better. You might have to thread it in and not be able to push it in from the side.
- with textured printbed, there is no inward melting, you can push the filament in from the side.
Credits:
Inspired by many other great clips of this sort.