1 / 1
120mm Fan Scoop Shroud for Thermaltake H200TG
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount fills the gaps below the regular mounting bracket on the THermaltake H200TG for better GPU Cooling
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This shroud blocks the lower gap found in the Thermaltake H200TG aswell as the gap between the fans to reduce air just recirculating and reducing cooling effieciency, also forces the fans to draw air from the bottom filter reducing resistance. The angle on the fan helps direct cold air directly into the GPU fans for colder temps (and in my case, prevent a printed gpu riser from getting too warm)
