1 / 5
Gratkit Firefly Filament Dryer Bearing and Desiccant mount — zdjęcie 1
1 / 5

Gratkit Firefly Filament Dryer Bearing and Desiccant mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Gratkit Firefly is a nice dryer but doesn't have a great solution for the spool bearings. This is a drop-in solution

Ocena
0 / 5
Polubienia
19
Pobrania
99
Wydruki
1
Wyświetlenia
487
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

I ran across the Gratkit Firefly filament dryer and it checked my boxes - reliably gets up to heat, actually dehumidifies filament per independent tests, and offered an interesting control solution that I can hook into Home Assistant.

One problem I ran into immediately is the poor solution for holding the spool, the included spool bearing is just a piece of plastic riding on another piece of thin plastic.  The solution here provides a drop-in replacement for that mount using a pair of standard 608 “skate” bearings.

There are models for two different rollers, one which works like normal and a second which comes in two parts, has air vents around the body, and a little funnel up top to pour in silica gel desiccant beads.

BOM

 

Tagi