1 / 3
TPU Spikes for speakers- STL for 6mm bolt included // updated!
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Speaker Spikes printed in TPU updated with the 6mm double sided bolt
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Needed some spikes because I only got 4 with the speakers.
They are exact copies of the spikes delivered with Chariot Hiper speakers.
The hole in the base is approx 5mm and the base itself 25mm.
You can adjust the infill for softer or more rigid spikes depending on your likes and weight of the speakers.
Please leave a like, comment or make if you like them.
The red ones are the printed ones