12 / 20 Gauge Shotgun Shell Holder (Vase Mode)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 12 / 20 gauge shotgun shell holder designed for vase mode 3D printing, featuring a lightweight and smooth design.
- Ocena
- 4 / 5
- Polubienia
- 19
- Pobrania
- 166
- Wydruki
- 1
- Wyświetlenia
- 623
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
The 12 / 20 Gauge Shotgun Shell Holder (Vase Mode) is designed to efficiently store and organize 12 or 20-gauge shotgun shells, holding up to 25 shells (a standard pack). This model is optimized for vase mode 3D printing, ensuring a lightweight yet durable structure with minimal material usage. The open structure allows for quick access to shells while keeping them neatly arranged.
There are four versions of each model, each designed for a specific nozzle size:
- 1.0mm Nozzle – Maximum strength and fastest print time.
- 0.8mm Nozzle – Increased durability with a thicker wall. (Recommended)
- 0.6mm Nozzle – Balanced strength and print speed.
- 0.4mm Nozzle – Thin and lightweight for minimal material usage.
Dimensions:
- Length x Width
- 12 Gauge ~ 112mm x 112mm
- 20 Gauge ~ 97mm x 97mm
- Base Height - 1.5mm
- Overall Height - 15mm
Instructions:
Choose the model that matches your nozzle diameter and gauge size (this is necessary to ensure the shells fit correctly). Print the model in Vase Mode using your choice of filament. No supports are necessary.
IMPORTANT: The base height is 1.5mm, so the bottom layer height must be at least that tall to ensure proper base construction. For example:
- If using a 0.3mm layer height, set the printer to ≥ 5 bottom layers (0.3mm × 5 = 1.5mm).
- If using a 0.5mm layer height, set the printer to ≥ 3 bottom layers (0.5mm × 3 = 1.5mm).