Nylon strap end cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
End for 3/4" nylon strap to prevent it from being pulled out of the snap buckle.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 338
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So, you replace your crushed snap buckle, but you had to cut the folded end open to get the new buckle on the strap. Since you have a strap full of plastic buckles, you might as well have a plastic end piece to keep the strap from running away through the buckle.
I might be able to sew through three layers of nylon, but this was easier.
One model is smooth and a little thinner. The other is a little wider with fancy grooves. Not sure which I like better. They both hang on rather well. It should scale to larger straps.
Print as oriented. Hold the box on the end of the strap and slide the cover over the strap into the slots (three sides).