Nylon strap end cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
End for 3/4" nylon strap to prevent it from being pulled out of the snap buckle.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 103
- Makes
- 1
- Views
- 338
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
So, you replace your crushed snap buckle, but you had to cut the folded end open to get the new buckle on the strap. Since you have a strap full of plastic buckles, you might as well have a plastic end piece to keep the strap from running away through the buckle.
I might be able to sew through three layers of nylon, but this was easier.
One model is smooth and a little thinner. The other is a little wider with fancy grooves. Not sure which I like better. They both hang on rather well. It should scale to larger straps.
Print as oriented. Hold the box on the end of the strap and slide the cover over the strap into the slots (three sides).