9mm Hollowpoint Bullet insert bead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small EDC bead designed to insert into a spent 9mm casing. It works well as a lanyard bead when woven in.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a small EDC bead designed to insert into a spent 9mm casing. It works well as a lanyard bead when woven in.
A hole can be drilled through the casing to use as a bead and help hold everything together although it is a very tight fit and no glue should be needed, or it can be woven in at the rim of the casing.
This is a simple and fun print that adds a bit of personality to your everyday carry setup.
Base is tapered to slide into a casing and could be used as a snap cap when assembled as the oal should be 28mm and in spec with a real bullet when assembled leaving no room for powder.
Recommended layer height: 0.12mm for better detail (picture is 0.35mm)
No supports required