9mm Hollowpoint Bullet insert bead
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small EDC bead designed to insert into a spent 9mm casing. It works well as a lanyard bead when woven in.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a small EDC bead designed to insert into a spent 9mm casing. It works well as a lanyard bead when woven in.
A hole can be drilled through the casing to use as a bead and help hold everything together although it is a very tight fit and no glue should be needed, or it can be woven in at the rim of the casing.
This is a simple and fun print that adds a bit of personality to your everyday carry setup.
Base is tapered to slide into a casing and could be used as a snap cap when assembled as the oal should be 28mm and in spec with a real bullet when assembled leaving no room for powder.
Recommended layer height: 0.12mm for better detail (picture is 0.35mm)
No supports required