1 / 3
Shelf Storage Clip for the CXWXC Bike Repair Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage solution for the folding CXWXC bike repair stand's side-shelf.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About the Model
- The clip is intended to hold the side-shelf securely to the 50mm OD upright pipe for storage and transport.
- The handlebar support is just ‘strapped onto’ one of the legs for storage. This model has no accommodation for that.
Printing
- Print the clip itself:
- Print upright for maximum strength on the clip ‘flexure’, with supports.
- Printed in 5-perimeter wall PA6 nylon for durability and temperature resistance (anticipating the bike stand sitting in a hot car where PLA/PETG won't suffice).
- Supports will be quite hard to remove with nylon (wear eye protection).
- Ensure the screw holes are cleared of support material and are a free fit.
- Print 3 spacers - these were just a quick rescale+re-save from https://www.printables.com/model/121951-functional-washers-for-petgasa-various-sizes-lr-ba .
Installation
- Replace the original M5 buttonhead screws with M5x20mm screws - I took this opportunity to also add a metal washer between the screwhead and the plastic shelf.
- Add 1 spacer to the back of each screw.
- Mount the clip, and secure with a washer + M5 nylock nut.