1 / 3
Shelf Storage Clip for the CXWXC Bike Repair Stand — image 1
1 / 3

Shelf Storage Clip for the CXWXC Bike Repair Stand

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A storage solution for the folding CXWXC bike repair stand's side-shelf.

Rating
0 / 5
Likes
2
Downloads
9
Makes
0
Views
90
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

About the Model

  • The clip is intended to hold the side-shelf securely to the 50mm OD upright pipe for storage and transport.
  • The handlebar support is just ‘strapped onto’ one of the legs for storage. This model has no accommodation for that.

Printing

  • Print the clip itself:
    • Print upright for maximum strength on the clip ‘flexure’, with supports.
    • Printed in 5-perimeter wall PA6 nylon for durability and temperature resistance (anticipating the bike stand sitting in a hot car where PLA/PETG won't suffice). 
    • Supports will be quite hard to remove with nylon (wear eye protection).
    • Ensure the screw holes are cleared of support material and are a free fit.
  • Print 3 spacers - these were just a quick rescale+re-save from https://www.printables.com/model/121951-functional-washers-for-petgasa-various-sizes-lr-ba .

Installation

  • Replace the original M5 buttonhead screws with M5x20mm screws - I took this opportunity to also add a metal washer between the screwhead and the plastic shelf.
  • Add 1 spacer to the back of each screw.
  • Mount the clip, and secure with a washer + M5 nylock nut.

 

 

 

Tags