1 / 7
Filament Roller for MMU Drybox — zdjęcie 1
1 / 7

Filament Roller for MMU Drybox

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you're looking to enhance the movement of your spool, consider replacing the auto-rewinder with this filament roller.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
85
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

I had some problems with my extruder and noticed that the auto-rewinder was making it a bit difficult to pull the filament from the drybox. So, to reuse the same box, I designed this roller to fit inside. You will need 4 625zz bearings to assemble it.

Printing Profile
  • Material: PLA/PETG
  • Infill: 20%
  • Walls Loops: 3
  • Supports: Yes
  • Brim: Recommended

Tagi