1 / 2
Small Mecanum Wheel - 3/8 inch Hex bore for FRC — zdjęcie 1
1 / 2

Small Mecanum Wheel - 3/8 inch Hex bore for FRC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,86 € – 1,05 € netto (bez VAT)

Dla pliku: 6x mecanum rollers fuzzy skin_0.3mm_PETG_MK3S_1h8m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,96 € netto (środek widełek).

Masa podana przez autora
9 g
Czas druku podany przez autora
1,13 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Designed for FIRST Robotics Competition use, these mechanum wheel have a 45mm principle diameter and weigh 20g/0.75oz

Ocena
0 / 5
Polubienia
15
Pobrania
96
Wydruki
0
Wyświetlenia
941
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Ultra lightweight and some of the smallest mechanums available. Print in PETG.Ream all the roller shaft holes with an 1/8inch drill bit and hand drill. Ream the two screw holes with a 3mm bit. Ream all the roller holes with a 3.5mm bit. 

From McMaster-Carr you need to acquire the following:

197155A419Acetal Dowel Pins, 1/8" Diameter, 3/8" Long, Packs of 50
294879A122Off-White Nylon Phillips Rounded Head Screws, M3 x 0.5 mm Thread, 12 mm Long, Packs of 100
393800A116Nylon Hex Nut, M3 x 0.5 mm Thread, Off-White, Packs of 100

Acetal pins press into the holes (after reaming) and stay in place with friction. (And possibly a dot of glue on the back if your 1/8" bit drills oversize holes - I didn't need any glue personally)

Used nylon screws because they save weight when you have a bunch of these rollers. We have 30 on our bot. (team 3140)

Tagi