1 / 2
Small Mecanum Wheel - 3/8 inch Hex bore for FRC — image 1
1 / 2

Small Mecanum Wheel - 3/8 inch Hex bore for FRC

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed for FIRST Robotics Competition use, these mechanum wheel have a 45mm principle diameter and weigh 20g/0.75oz

Rating
0 / 5
Likes
14
Downloads
91
Makes
0
Views
931
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Ultra lightweight and some of the smallest mechanums available. Print in PETG.Ream all the roller shaft holes with an 1/8inch drill bit and hand drill. Ream the two screw holes with a 3mm bit. Ream all the roller holes with a 3.5mm bit. 

From McMaster-Carr you need to acquire the following:

197155A419Acetal Dowel Pins, 1/8" Diameter, 3/8" Long, Packs of 50
294879A122Off-White Nylon Phillips Rounded Head Screws, M3 x 0.5 mm Thread, 12 mm Long, Packs of 100
393800A116Nylon Hex Nut, M3 x 0.5 mm Thread, Off-White, Packs of 100

Acetal pins press into the holes (after reaming) and stay in place with friction. (And possibly a dot of glue on the back if your 1/8" bit drills oversize holes - I didn't need any glue personally)

Used nylon screws because they save weight when you have a bunch of these rollers. We have 30 on our bot. (team 3140)

Tags