Star Explorers Insert (Queen Games Version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple organizer for the constellation tiles.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 68
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is a simple organizer to keep all the constellation tiles in place. Print 2 lids and 2 boxes for each game.
This is based on the Queen Games KS version, I do not know if it will fit the original Polish edition.
The lid is designed to be printed flat side down, and is held on by tension. If you find them too tight or too loose you can reprint .1-.2 mm larger in the X and Y directions. Make sure to manually adjust the X and Y measurements and unlock scaling so it doesn’t scale the rest of the model. Be aware that it will slightly loosen over time, so err on the side of tight. Make sure your adhesion is good for best results.
Happy Gaming!
If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store.