Liczymy pasujące modele…
TinTin Moon Rocket - Destination Moon | Explorers On The Moon - Height: 49 cm. A couple of years ago I bought the comic book and scanned the page with the blue print of the rocket. Imported the scan into the modeler and used it as a…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Insert for Explorers of Navoria + Forgotten Lands Expansion + Deluxe Components + Card Trays! Card trays fit sleeved cards! The box currently closes almost flush, which is barely noticeable. Should be good for vertical storage. I use the…
There are already some insert but none what meet my conditions at once - compatible with deluxe components, compatible with expansion, vertical storage compatible, … I created this one. You can use all boxes for playing, just take them…
If you don't have access to a 3D printer, or would like to support my hobby, I have a shop where you can purchase this set. Visit StoreAllTheBits Online Store If you do your own 3D printing, but would still like to support my hobby, feel…
This is a box insert for Guild of Merchant Explorers designed to keep all the components organised in the box and make setup faster. It's a remix of Serindu's design and removes the logos and text that were designed for multicolour…
Adds lids to the player pieces so that you can store vertically, and with the player boards flat.
An organizer for the Flip 'n' Write game "Explorers" by Ravensburger. Only a single .stl file ;)
6-25-25 New alternate pieces found here . A functional organizer to instantly play! Each person has a shield box with player pieces and then two communal resource trays hold the remaining pieces. Fits sleeved cards (Sleeve Kings).…
An organizer for the board game "Explorers". It helps to build the game and keeps all the parts together. Print instructions Resolution: 0.2mm Infill: 10% Supports: No Filament: PLA
Print every file once with the exception of the player parts that needs to be printed 4 times.
An insert for the board game, Explorers of Navoria. Includes expansion and deluxe components.
I was hard to fit all components, that's why not all components have the same storage. I hope everything will fit you as well. If you like it and found the insert helpful, please express your appreciation by supporting me on my Ko-fi…
If you're lucky enough that your name is driving around with Percy on mars since february I got a thing for you. Since my little family is all aboard I thought it would be nice to have my own chip plate to remind myself that science…
Another insert for this game! I made one as all the versions I saw didnt support or were unknown to support sleeves, and as I got the premium ones with the Kickstarter, I knew they would be too thick for the existing inserts! So this…
Insert for the board game Explorers of Navoria. Multi-color prints let you print a lid with two colours to make nicer boxes for your games. Print one of each box to make the game This is using the board game toolkit openscad library.…
Meeple / Resource boxes and a tile caddy for Explorers of the North Sea. The boxes come from Acker's fantastic Parametric Compartment Box with Lid . The Tile Caddy is my own design using Fusion 360. If the boxes are a bit tight, just fold…
Here is a simple organizer to keep all the constellation tiles in place. Print 2 lids and 2 boxes for each game. This is based on the Queen Games KS version, I do not know if it will fit the original Polish edition. The lid is designed to…
Edit 7/10/25: Added more space for the magnets on the compass box, they were a little too tight. Edit 11/21/25: Added a new version of the compass body that will print easier on the bottom. I love this game and I knew I could do better,…
Space Explorers turned out to be one of favorite games in my family. And no insert for organizing box components. This make is for Space Explorers + New Horizons expansion, which allows to fit everything in one box.
It is needed only if you have the Night Sky Explorers: Zodiac expansion. Print each component just once. There are no special printing requirements. If the lid turns out too tight or too loose, simply reprint it with 0.1–0.2 mm more or…
What is it? It's an insert for The Guild of Merchant Explorers . It goes inside your game box and replaces all the resealable plastic baggies you were using to keep the pieces of the game organised. Why would I want one? It's cleaner,…
I put together a bit of a Franskenstein insert for Navoria! I wanted an insert that wouldn't let pieces fall all over because I always have to take my games elsewhere to play, so they're going to go vertical and upside down and moved a…
This is a replica of the classic figure B from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Lantern Bearer" Also appeared in…
This is a replica of the classic figure R from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Female Illusionist" Print Settings…
This is a replica of the classic figure E from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Ranger" Print Settings Printer…
This is a replica of the classic figure S from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Bowman" Print Settings Printer…
This is a replica of the classic figure G from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Charging Warrior" also perhaps…
This is a replica of the classic figure O from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Halfling Torch Bearer" or…
This is a replica of the classic figure M from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Female Fighter" or alternately…
This is a replica of the classic figure F from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Barbarian w/Axe" or alternately…
This is a replica of the classic figure from the Grenadier box Explorers number 5001, included as an alternate of figure J, "Bard" ( https://www.thingiverse.com/thing:4773368 ) in some sets. ( see…
This is a replica of the classic figure T from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Cleric 'Turning' " Similar to, but…
This is a replica of the classic figure H from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Thief w/ Sword" Also included in…
This is a replica of the classic figure C from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Elf Thief" This is one of the very…
This is a replica of the classic figure K from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Dwarf w/ Battle Axe" Also appeared…
This is a replica of the classic figure N from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Dwarf Thief" Also appeared as…
This is a replica of the classic figure I from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Packbearer" Also appeared in set…
Parametric insert for The Guild Of Merchant Explorers This is an insert for the game The Guild Of Merchant Explorers It uses the amazing The Boardgame Insert Toolkit The source code can be found in Github You need two player box top, two…
This is a replica of the classic figure A from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Cleric/Assassin" Print Settings…
This is a replica of the classic figure J from the Grenadier box Explorers number 5001. ( see http://www.dndlead.com/grenadier/ADandD/5001.jpg ) Scan made using https://www.thingiverse.com/thing:1762299 "Bard" Print Settings Printer…
Organiser for Explorers of the Woodlands that helps keep sleeved cards with rest of the components
print every parts at 1300% scale and 10% infill are enough. so good fun :) personally, I ve' printed it with pla.
This is an organizer/insert for Guild of Merchant Explorers + Queens Special Orders expansion. It supports premium sleeve cards.
An organizer for the Flip 'n' Write game "Explorers" by Ravensburger. Only a single .stl file ;)
6-25-25 New alternate pieces found here . A functional organizer to instantly play! Each person has a shield box with player pieces and then two communal resource trays hold the remaining pieces. Fits sleeved cards (Sleeve Kings).…
