Mini ITX modular NAS - 3.5 HDD remixed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the TooManySecrets project, it is a totally modular Mini-ITX system that can become a full-fledged NAS.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have described all the main differences with the original project in the appropriate section, you will find the main features there. Now some advices:
-Print everything in PETG, so that the print is more solid and durable, also remember that HDDs can become quite hot if they work a lot, so PETG is also very suitable for this reason.
-No sections require supports to print, except the top/bottom parts, they require small supports for the clip attachment points, nothing problematic.
-in the pictures you can see the type of adapter I used to extend the SATA sockets, it is very common, inexpensive, exists in various shapes and versions (even just the adapter without cables) the important thing is the part with the grooves for the screws, be sure it is there, because it is necessary to lock it in place.
-The whole project is now based on M3 screws (10mm up to 25mm), brass inserts and bolts, make sure you have them available (at least M3 screws and bolts).
-I removed the texts from the faceplates, because I found it more convenient to insert them directly into the slicer, if your slicer does not allow you to do this you can still do it in CAD, refer to the last point of this list.
-You can find the .f3d files in the download section if you want to make further changes.