Wahoo Kickr Core Tennisball mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Wahoo Kickr Core Tennisball mount, for a more real life feel.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 1354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have had heard about something like this already and have seen a buyable version on Amazon Germany for about 80 € without Tennisballs, that was way to expensive for buying 3d printed parts for me, therefor I quickly designed this part myself.
I printed it on my Prusa Mini with a 0.6mm nozzle, the standard Prusaslicer 0.35mm Structural profile in PETG and no supports.
It is a pretty tight fit, over the original feet and I hammered in on with a rubber mullet, the 8 Tennisballs just loosely fit and are not holding if you lift the Kickr Core.
Note: There is an updated version to fit my updated front wheel raiser.