Main Pedestal and my "Flusi-Box" (Work in Progress)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the "wrapper" for the main pedestal parts and my whole A320 mobile Homecockpit housing.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 1369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I (re-)created my cheap, mobile and small home cockpit which consists right now of a wooden box (50x46x15cm) standing on my right and a special holder for the Airbus Style Joystick and Tiller.
The main Pedestal consists of the Spoiler, Flaps and the Throttles.
These controls are connected to an Arduino Leonardo, which is acting as an HID.
Additionally, this Leonardo handles the Tiller (connected from “outside” over a DIN 5-pin cable and has a small plate for the calibration electronics and the dimmer for the “flood light”, as i do not use buttons etc. with backlit.
To get all modules connected over only one USB-Cable to the PC, there is an internal power supply, an active USB-Hub and a connecting plate added to the housing.
The other modules shown in the picture:
Landing Gear, Engine Starter Panel, Rudder Trim, Parking Brake, Cockpit Door, RMP, ATC/TCAS and MCDU.
The Trim Wheel is still under development and will be posted here as soon as i'm happy with it ...
As i haven't created my modules with backlight, i placed two USB-pluggable and bendable "LED-Floodlights" at the back edge. To mount the USB-plugs i now included the mointing plates.
The front panel for the calibration plate is a 3MF-File which was created in Bambu Studio.
The height of the letters were reduced and the 3MF-profile is ready for multi material printing.
If you need the STL open it either in Bambu Studio or https://3dviewer.net/ and export it from there.
In the PDF are also further information like the BOM, assembly instructions and so on.
But be aware about, that this is “Work in Progress” and there might be unnoticed changes or additions.