Core One UniFi G3 / G4 / G6 Instant Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily mount your UniFi G3 / G4 / G6 magnetically into the corner of your Core One, just like the Buddy3D camera.
- Ocena
- 4,875 / 5
- Polubienia
- 41
- Pobrania
- 153
- Wydruki
- 7
- Wyświetlenia
- 1345
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easily mount your UniFi G3 / G4 / G6 magnetically into the corner of your Core One, just like the Buddy3D camera.
Requires 6x 10x5x2mm neodymium magnets, and uses the ¼" bolt from the “foot” that comes in the box with the camera, so no other parts required. I recommend using a normal straight USB C cable rather than the packaged angled one as it will sit more flush against the inside.
Note: I have only tried this with the G3, although the G4 should be functionally identical. The G6 is significantly deeper, and might interfere with the print head if driven to XY 0/0 - I would be interested to hear from anyone who has one.
Best printed in PETG.