1 / 5
Core One UniFi G3 / G4 / G6 Instant Mount — image 1
1 / 5

Core One UniFi G3 / G4 / G6 Instant Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Easily mount your UniFi G3 / G4 / G6 magnetically into the corner of your Core One, just like the Buddy3D camera.

Rating
4.875 / 5
Likes
41
Downloads
153
Makes
7
Views
1,345
Reviews
8

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Easily mount your UniFi G3 / G4 / G6 magnetically into the corner of your Core One, just like the Buddy3D camera.

Requires 6x 10x5x2mm neodymium magnets, and uses the ¼" bolt from the “foot” that comes in the box with the camera, so no other parts required. I recommend using a normal straight USB C cable rather than the packaged angled one as it will sit more flush against the inside.

Note: I have only tried this with the G3, although the G4 should be functionally identical. The G6 is significantly deeper, and might interfere with the print head if driven to XY 0/0 - I would be interested to hear from anyone who has one.

Best printed in PETG.