Dayton Audio SAB-1060 SIM 7.3-Channel Amplifier Case with Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Dayton Audio SAB-1060 is an awesome amplifier, but it lacks a case. I created one to hold it and a power supply.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 615
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
***PLEASE MAKE SURE YOU UNDERSTAND BASIC ELECTRICAL SAFETY BEFORE ATTEMPTING THIS BUILD, OR CONSULT A PROFESSIONAL***
I made an enclosure to house the amplifier board and power supply. It has 10 outputs on the back for the 7.3 channels on the amplifier. I used a panel mount USB-C plug for signal input, and two pushbuttons on the front for power and mute. It's a rough draft, but it gets the job done! Feel free to use the same components as me (listed below) or substitute with anything you'd like!
Printed components:
| File Name | Quantity | Notes |
| Case Base | 1 | Print one depending on which size of button you want to use. |
| Enclosure Lid | 1 | In your slicer, you can set top/bottom layers to zero to let the infill pattern show. I used 5 walls, 50% hexagon for mine |
| PSU to amp mount | 1 | |
| Foot | 4 |
Purchased components:
- 19mm latching pushbuttons: https://a.co/d/c3InAmZ
- 10A Rocker Switch Power Inlet: https://a.co/d/bmeHdCZ
- 3-prong power cord: https://a.co/d/fcYC7v4
- USB-C panel mount passthrough: https://a.co/d/1Svkdfj
- 2-Way Spring Speaker Terminal: https://a.co/d/2EBycF8
- Dayton Audio SAB-1060 Amplifier: link
- 24V, 350W Power Supply: link
Other BOM Components:
| Part | Quantity | Where used? |
M3 Heatset Insert (M3 x D4mm x OD5mm) | 32 | Foot x4 Speaker terminals x20 Lid mounting x4 PSU to amp mount x4 |
| M3x6 FHCS | 4 | Foot → Case Base x4 |
| M3x6 BHCS | 28 | Speaker terminals x20 Amp mounting x4 Lid x4 |
| M4x6 FHCS | 2 | PSU → Case Base (holes on front) x2 |
| M4x6 BHCS | 4 | PSU to amp mount → PSU x4 |
| M4x8 BHCS (optional) | 2 | PSU → Case Base (inside) x2 |
