Greenworks Vacuum Cleaner Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The wall bracket to keep your vacuum cleaner organized
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
To assemble the holder you will need at least one GW1 bracket, then three GW2 parts and six M3x25 screws (for nozzles) and one GW3 (lower bracket). You will also need eight screws to attach the assembly to the wall, though you may try to use less if gready.
Pay attention to placement of the pins of the GW2 part: it is intentionally located in different ways and not in symmetry to fit the different nozzles.
IMPORTANT! Please note that to print GW2 parts you will need to rotate model upside down in the slicer to make proper cog without using supports.