Liczymy pasujące modele…
Scraper Bar Replacement for Greenworks Part R0200650-00 for 22" Snow Blowers, Tested working great with my SN60L02 but according to Greenworks should work with the following as well: Product Number Voltage Model 2605902 80V SNB403 2610102…
This holder allows you to attach the included brush/clean out tool to the handle of the Greenworks 22" 80v Snow Blower. My snow blower came with 2 extra self-tapping screws (pictured), so I designed this to use one of those. I also…
Wall mounted battery holder for the Greenworks 60v Battery.
supports are not needed but are quite recommended if you do print it with supports make sure to flip the model upside down in the slicer and add supports to it I printed it with no support but it is weeker and it depends on how well your…
Scraper Bar Replacement for Greenworks Part R0200650-00 for 22" Snow Blowers, Tested working great with my SN60L02 but according to Greenworks should work with the following as well: Product Number Voltage Model 2605902 80V SNB403 2610102…
To assemble the holder you will need at least one GW1 bracket, then three GW2 parts and six M3x25 screws (for nozzles) and one GW3 (lower bracket). You will also need eight screws to attach the assembly to the wall, though you may try to…
needed something shorter and compress the air to blow dry cars. Feel free to modify to your need.
I created this model so that I could wall mount my Greenworks battery charger using Multiboard. I grafted the Multiconnect parts to a battery charger holder I designed using Autodesk Fusion. Printing Guidelines: I printed using standard…
I created this model so that I could wall mount my Greenworks battery using Multiboard. I grafted the Multiconnect parts to a battery holder I designed using Autodesk Fusion. Printing Guidelines: I printed using standard Multiboard…
Bigger Greenworks machines like their riding mowers typically require multiple batteries that you need to carry from wherever you charge them to the machine. After precariously stacking batteries balanced against my chest and nearly…
For model BLB482. Gave it a little notch in the center to hold it steady.
Internal insert into the container for more ergonomic placement of the tool
Крепится на 2 самореза, стенку делайте не меньше 3 периметров, иначе держаться не будет, разогнется под весом воздуходувки
Based on the GreenWorks Pro model 2400402 leaf blower, with an existing attachment outlet diameter of ~ 69mm. I modeled the attachment very slightly oversized for the greenworks tube (~1mm larger). I'd rather add a wrap of tape before…
recommended settings: material: PETG Basic (or any material with UV resistance + good impact strength) infill pattern: grid infill density: 30% wall loops: 4 you might need to hammer it in after it's done. Don't forget to use a sharpie to…
This provides the ability to carry up to 4, 80v Greenworks batteries around with a single handle. You can carry larger higher capacity batteries like 5ah or larger on the sides opposite the handle, and 4ah and smaller inline with handle…
This holder allows you to attach the included brush/clean out tool to the handle of the Greenworks 22" 80v Snow Blower. My snow blower came with 2 extra self-tapping screws (pictured), so I designed this to use one of those. I also…
Better with PA6, but PETg should work well. I printed with PETg, but not tested yet with extremal low temperatures. Nozzle: 0.4mm Line width: 0.6mm Wall generator: Arachne Layer height: 0.2mm (0-33mm), 0.1mm or even less (33.2mm+) 5+…
Simple Wall Mount to hold the Greenworks 40Volt Blower. The blower just slides in. About 10hours to print. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lfCs7avPZTH Print Settings Printer Brand: Prusa…
Wall-mounted battery holder for Mountfield Greeworks system. Držák bateri na zeď pro systém Mountfield Greenworks.
I wanted a better head on my Greenworks ST80L00 trimmer. The problem is, the "universal" heads don't fit without some help. I bought a Speed-Feed 400 kit and figured out how to make it work. I printed the adapters using PETG with 100%…
This is designed to be mounted to the underside of a flat surface (eg. a table, a shelf, etc.) using screws. The holes are sized for #10 screws.
Mount this to your Greenworks pressure washer using the included nozzles. The mount fits over the existing grommets, with a thru-hole for the nozzles to retain their original fit. The slots are labeled with the color and spread. For…
I was not satisfied with the available battery adapters for use in my tiny electric go-kart build. I needed something stiff that I would never have to worry about. Designed for the 40V series of Greenworks batteries. Features polarity…
I created this adapter to allow me to better use my blower backpack to air dry my car after washing. It is intended to concentrate the air to provide better drying performance. I recommend printing with the round end down and with…
Mount for hanging a Greenworks 40V battery on a 3/4" (or 20mm) french cleat. Prints well as oriented in the STL. No supports necessary, low infill. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
Wall mounted battery holder for the Greenworks 80v Battery. I recommend printing this vertically so that the layer lines won't be a weak spot. I printed my initial model flat with PLA and it lasted about 2 years before giving out. Now…
This is an adapter that fits a 40v Hyper Tough 16" lawn mower, and allows you to mount a replacement blade I bought which is meant for a Greenworks mower. You will also need a washer to hold the blade on, greater than 22mm diameter with…
My Greenworks GD82ST snow blower's scraper bar broke (part number R0101068-00), and the delivery time is a month, but it snows every day, so I modeled and printed a replacement. To print, you need a printer capable of printing a part with…
Update March 2024: I've decided to move from HSW to IKEA Skådis System . Stronger. Easier. Here's a battery holder for the Honeycomb Storage Wall system and the Greenworks lawn care line. It uses a plug to hold it firmly in place with…
Direct replacement for the original leaf blower, easy to remove / swap. Shorter than the original spout, so easier to handle when working in smaller spaces or when longer spout is not required. Fits inside Prusa MK3
Greenworks 40V Battery Holder for IKEA SKÅDIS System 04/27/24 UPDATE : I made a version 2 that now has the same alignment plugs as my other Skådis designs, for easier installation. Also threw in a Greenworks logo like the Makita parts. I…
Greenworks Gen1 40V Battery Charger Mount for IKEA SKÅDIS System This is a Greenworks Gen1 40V charger mount for their line of yard tools (mower, leaf blower, etc) that mounts to the SKÅDIS pegboard with printed M2.5 T-Nuts from 6d6178 .…
Greenworks Gen2 40V Battery Charger Mount for IKEA SKÅDIS System New V2 here! This is a Greenworks Gen2 40V charger mount for their line of yard tools (mower, leaf blower, etc) that mounts to the SKÅDIS pegboard with printed M2.5 T-Nuts…
This soft tip should be printed in TPU and will fit snuggly over the excellent short spout model provided by @gpace08 here . Use-case for this is for when you're using this shorter spout to dry off vehicles - the TPU soft tip adds a small…
Greenworks Gen2 40V Battery Charger Mount V2 for IKEA SKÅDIS System This is an improved Greenworks Gen2 40V charger mount for their line of yard tools (mower, leaf blower, etc) that mounts to the SKÅDIS pegboard with printed M2.5 T-Nuts…
Some greenworks pressure washers comes without nozzle holder. I designed it for GPWG8II But should fit at least those too: GPWG8 GPWG7 GPW2000-1RG PWA201 and other models with 30 mm handles. I also recommend to have aluminum profile 20x15…
Summary: The Greenworks offering is $100, and can be built for much less, using a couple of home store (Home Depot, Lowes) building materials, and some 3-D printed parts. ASIN is the Amazon stock number. Greenworks, 24V Vacuum, Brushless…
Made from PETG, I wanted a tool to load the loose filament that I had bought onto my Greenworks strimmer. Nothing works better than a bit of assistance, so design and made a tool to hold onto spool while I use electric drill, (in reverse…
A simple wall mount for the Greenworks 80V Leaf Blower or Weed Whacker. It will support the tool+battery. Only tested with PLA. But has held up to 4+ sweltering summers (easily above 110F in the garage for weeks). Print Settings Printer…
