Greenworks Tools 80v Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mounted Greenworks Tools 80v Battery Holder
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 454
- Wydruki
- 7
- Wyświetlenia
- 2353
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall mounted battery holder for the Greenworks 80v Battery.
I recommend printing this vertically so that the layer lines won't be a weak spot. I printed my initial model flat with PLA and it lasted about 2 years before giving out. Now it's PETG and vertical and has been running strong.
Settings
Layer height: whatever you want - functional print so I used 2.5 structural profile
Infill: 15% cubic
Minimum 4 perimeters
Vertical orientation +/- brim depending on your adhesion needs
No supports needed in vertical orientation
Material: recommend PETG if mounting in the garage or other hot area, otherwise PLA should hold up fine if temperature controlled.
Recommend mounting this either into a stud or using heavy duty sheet rock anchors given the weight of the battery.
Happy printing and grass cutting!