Scraper bar replacement for Greenworks GD82ST 82V
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
part number R0101068-00. Can be printed if you don't have an original.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 939
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
My Greenworks GD82ST snow blower's scraper bar broke (part number R0101068-00), and the delivery time is a month, but it snows every day, so I modeled and printed a replacement.
To print, you need a printer capable of printing a part with a width of 300 mm. I suggest to print two parts from PETG; set the number of top and bottom layers to 8-10 and/or set number of wall to 5-10. Parts can be glued together with dichloromethane.
Supports required for pins only. I suggest to leave supports that touching bed plate only.
Tip: If it's hard to screw it with your snow blower - use thinner screws.
Tip2: Usally not required, but check that wheels, screaper and stops at the same line. If it's not - adjust stops (see image).
Update 24.01.2024: Updated model with better edge layout + other minor changes, it now scrap better.